Diamond Nozzle for 1.75mm filament

More Views

Diamond Nozzle for 1.75mm filament
Excl. Tax: $21.00 Incl. Tax: $26.25
  • Buy 10 for $19.53 ($24.41 incl. tax) each and save 7%
  • Buy 25 for $18.69 ($23.36 incl. tax) each and save 11%
  • Buy 50 for $17.43 ($21.79 incl. tax) each and save 17%
  • Buy 100 for $16.38 ($20.48 incl. tax) each and save 22%

Availability: In stock

In Stock

Diamond Hotend nozzle.Triple inputs for multi color/material 3D printing
Diamond Nozzle for 1.75mm filament is available for purchase in increments of 1
Description

Details

The Diamond Nozzle is a brass nozzle for 3D printing in multiple colors and materials. It has three filament inputs for 1.75mm filament and a common 0.4mm nozzle orifice.

The Diamond Nozzle is designed with the smallest possible mixing chamber, to make color shifts as fast as possible and avoid unnecessary filament waste. To ensure rapid nozzle heat up the nozzle have been constructed as compact as possible and features a cutout for standard 40W heater cartridge and leaded thermistor

Benefits of the Diamond Nozzle

  • Easy calibration
  • Better precision compared to multi-nozzle printing
  • Prints with 3 different colors
  • Minimal filament waste
  • 3 pcs inputs for 1.75 mm filament
  • Common 0.4 mm nozzle orifice
  • Smallest possible mixing chamber for minimal waste and fast color change
  • Cutout for standard 40W heater cartridge and leaded thermistor
  • 3 pcs threaded mounting holes for state of the art E3D v6 HeatBreaks & HeatSinks

Diamond Nozzle Features

  • 3 pcs inputs for 1.75 mm filament
  • Common 0.4 mm nozzle orifice
  • Smallest possible mixing chamber for minimal waste and fast color change
  • Cutout for standard 40W heater cartridge and leaded thermistor
  • 3 pcs threaded mounting holes for state of the art E3D v6 HeatBreaks & HeatSinks

Links

The Diamond Hotend wiki page at reprap.org

3D printed parts for the Diamond Hotend on Thingiverse

The Diamond Hotend on Kickstarter

FAQ

Question: My Diamond Hotend is clogged, how do i clean it?

Answer: Unplug the bowden tubes on the heated Diamond Hotend. Use a heated 2mm hex key to insert in each heatsink, all the way into the nozzle tip and pull out quickly to remove any plastic. Repeat process until clean. No need to disassembly the heatsinks! If nozzle tip is clogged, use a 0.4mm drill/wire to clean from outside.

Question: My Diamond Hotend is leaking, how do i stop the leak?

Answer: After mounting the heatsinks, heatup the nozzle to 240-250 degree celcius and tighten the heatsink with a plier. If still leaking you can use some PFTE tape on the heatsink threads. Never use cooling paste on the threads!

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x