Folger Tech FT-5 Large Scale 3D Printer Kit

More Views

Folger Tech FT-5 Large Scale 3D Printer Kit
Excl. Tax: $505.52 Incl. Tax: $631.90

Availability: In stock

In Stock

Folger Tech FT-5 Large Scale 3D Printer Kit
Folger Tech FT-5 Large Scale 3D Printer Kit is available for purchase in increments of 1
Description

Details

The Folger Technologies FT-5 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea. 

The highlights of this kits are the massive 300x300x400mm (12x12c15.75") build area, Linear rails on the X and Y movements. Dual Y and Z motors for added speed and power. This kit also includes a aluminum build surface and headed bed capable of printing many materials including PLA and ABS.

This kit includes the following:
  • 2004 LCD with SD card Reader
  • Laser cut Frame (Melamine ) 
  • x4 LMF8LUU Linear Bearings
  • x8 SK8 Mounts
  • x4 KP08 bearings
  • x3 Idler Pulley
  • 4x 8mm Chromed Linear Rod for  Z (Pre-Cut)
  • 2x T8 4 Start Lead Screw 8mm pitch 
  • x1 300mmx300mm Heated Bed
  • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG 
  • 360W 12v 30A Power Supply 
  • x6 NEMA 17 5.0kg/cm Stepper Motors
  • 3x 400mm 12mm Linear Rails
  • x3 Meters of GT2 Belt
  • x2 GT2-188 Belt
  • x7 20 Tooth Pulleys
  • x1 MKS Gen 1.4 Controller
  • x5 A4988 Stepper Drivers 
  • x1 Roll of 8mm Kapton Tape
  • x3 Electronic End Stop Circuits w/ LED
  • x3 Belt Tensioners
  • x8 Threaded Bed Adjustment Knobs
  • x8 Bed Springs
  • All Required Nuts/Bolts for Assembly
  • Power Cable
  • 2mm Aluminium bed plate
Features: 
  • Impressive 300mmx300mmx~400mm Build Area
  • Able to print ABS & PLA Plastic (1.75mm)
  • Can run 110V or 220V

Items you will need:

  • Tools
  • Filament
  • Time

Build Guide and Firmware/Software:

** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records.

 

  • Google Drive Link: (Build Guide and Firmware)
  • https://drive.google.com/open?id=0B9b1NbuMK524aGhPQXRLTW9mams

 

Specs:

  • Print Area: 300x300x~400mm (12x12x15.75") Build area

  • Printer Size: 740mmx500mmx540mm

  • Power: 360w 12V system CE rated Power Supply, can use 110v or 220v

  • Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)

  • Max Bed Temp: 70-110C

  • X/Y Linear Rail System

  • Z T8 4 Start  Lead screws

  • Controller: MKS Gen 1.4

  • Resolution: 0.05mm (50 Microns)

  • Max Stable Speed: TBA

  • 12V Heated Bed

  • SHIPPING WEIGHT 45lbs! (21kg)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x