LayBrick looks and feels like sandstone and is just great for architecture models and landscapes.
Printed objects can also be colored and easely grinded.
For architecture models / landscapes
No plastic feeling
Printed objects can be coloured and easely grinded
Stics well on print bed,
No heated bed necessary
Contains natural mineralic fillers (super-fine milled chalk) and harmless co-polyesters
A new Filament - for huge objects / architecture models
(use the entire space of your jumbo printer)
Size of the object in video: 30 x 20 x 2 cm 11.8 x 7.9 x 0.8 inch
Very rough surface, near sandstone
Ideal for jumboprinters
Near zero warp !!!
Recommended print settings:
Print temp: 165°C to 210°C, smooth to rough surface, 165°C less to 210°C more oozing
You may print layer-thickness from 0.1 mm to 0.5 mm
Slicing: object fill max. 25%, fan needs to be on
It´s recommended to print in rooms with min. 20° Celsius. Colder more brittle
If you print with code M227 // values f.e. S:30000 P 10000
Wait after printing until object is hardened, then remove it from platform
Temperature stabil to about 70° Celsius
Means that the grey colour of the filament may change in nuances, the filament is also a little maiden, it may brake while bending, you should be sure (especially during a long print) that you can feed a broken part of filament again in your printer.
250 grams of 1.75mm LayBrick Filament
0.25 kg, 250 grams
Use spaces to separate tags. Use single quotes (') for phrases.