MakerBot MightyBoard

More Views

MakerBot MightyBoard

Regular Price: $70.00

Special Price Excl. Tax: $32.00 Incl. Tax: $40.00

Availability: In stock

In Stock

Makerbot Motherboard v2.4. Arduino Mega Shield for your RepRap 3D Printer
MakerBot MightyBoard is available for purchase in increments of 1
Description

Details

Description from makerbot.com

Overview

 

The MakerBot Motherboard is a shield for the Arduino MEGA. This board is the heart of your MakerBot and controls all the other boards. Its all about connectivity. The Arduino MEGA provides the USB interface, and the motherboard has an SD card slot for storage. For motion control, it has headers for five stepper drivers, so it can drive your XYZ positioning system and have room left over for controlling two extra stepper motors. Along with steppers, it has headers for 6 endstop cables (X+/–, Y+/–, Z+/–) and an e-stop switch. The interface connector is can be connected to an interface board for controlling the machine without a computer. To control the extruders, it comes with 2 rs485 ports and can support up to five RS485 ports. It accepts a standard ATX header for power.

Powerful Arduino MEGA Core

 

The motherboard is build on top of the Arduino MEGA from the open source Arduino project. This new board has more IO pins, more memory, and more program space. This translates into a more powerful motherboard with more capabilities and lots of room for modification. It also means bigger print buffers, normal USB to serial support, and better future compatibility.

Control up to Five Stepper Drivers

With all the extra pins available on the motherboard, we decided to add headers for five stepper drivers. That means you can easily control five different stepper drivers. You can easily drive an XYZ cartesian bot and have two steppers left over for extruders, rotary axes, or whatever else you can dream up. The headers are compatible with both v2.x and v3.x stepper drivers.

 

Full Endstop Support

Endstops are a critical part of a successful 3D printing experience. That's why we integrated the endstop connectors directly onto the motherboard. We switched to a 0.100" pitch, indexed connector that fits perfectly with our endstop cables. There are a total of seven endstop connector headers available: X+, X–, Y+, Y–, Z+, Z–, and an E-Stop header for those who wish to add an emergency stop button to their MakerBot. Most machines will only need three endstops, so the other 4 are available for your modification.

 

20 Pins to Expand On

We want you to be able to hack your MakerBot easily and simply. That is why we've provided a 20 pin IDC header (2 rows of 10 0.100" spaced pins). None of these pins are currently used for anything else, so you are free to hook up whatever you'd like here. More steppers, an LCD screen, or an interface board with buttons are all easily within your reach.

 

Interfaces

The motherboard is the heart of the system: It connects to your computer to receive instructions, and it tells the rest of your MakerBot what to do. This board is all about the connectors. Wiring it up can seem intimidating at first, but ultimately it is a very straightforward process.

Stepper Drivers

The motherboard is capable of driving up to five different stepper drivers at the same time. These motors are sometimes referred to as an axis (singular) or axes (plural). The headers for the stepper drivers are labeled X, Y, Z, A, and B.

Pinout

PINNAMEFUNCTION
1 N/C This pin is unused and not connected to anything on the motherboard.
2 GND This pin is connected to ground on the motherboard.
3 STEP This pin is the step pin, and will send a pulse to the stepper driver when it needs to take a step.
4 DIR This pin is the direction pin. HIGH = forward, LOW = reverse. This can be configured in software.
5 ENABLE This pin is the enable pin. LOW = enabled, HIGH = disabled. This pin turns the stepper driver on or off. This can be configured in software.
6 N/C This pin is unused and not connected to anything on the motherboard.
 

Power Input

This is a standard 20 pin ATX power connector. It is designed to interface with any ATX power supply. A comprehensive pin-out for the ATX standard is available at pinouts.ru

 

Endstop Connectors

The endstops tell your MakerBot when it has reached the minimum or maximum of its movement limits. This header is where they are plugged into. It is polarized which means the connector can only be inserted in the correct orientation.

Pinout

PINNAMEFUNCTION
1 5V This pin provides 5V to the endstop switch.
2 GND This pin is connected to ground on the motherboard.
3 GND This pin is connected to ground on the motherboard.
4 SIGNAL This pin is connected to a digital input pin on the motherboard. LOW = endstop activated, HIGH = endstop normal. The interpretation of this value can be configured in software.
 

RS485 Connectors

Communications between the motherboard and the extruder controller occurs over a serial protocol called RS485. RS485 is a differential signalling protocol that helps reduce noise problems and communication errors.

This connector provides optional +12V power to a board which can simplify connections.

THESE CONNECTORS ARE NOT FOR ETHERNET

Do not plug this board into your router. Bad things might happen.

PINNAMEFUNCTION
1 RS485A This is channel A of the RS485 serial communications protocol.
2 RS485A This is channel B of the RS485 serial communications protocol.
3 +12V This pin is connected to the +12V power supply.
4 +12V This pin is connected to the +12V power supply.
5 +12V This pin is connected to the +12V power supply.
6 GND This pin is connected to ground on the motherboard.
7 GND This pin is connected to ground on the motherboard.
8 GND This pin is connected to ground on the motherboard.
 

Reset Button

The reset button on the front of the board will reset the connected Arduino MEGA when it is pressed.

 

Interface Connector

 

The Arduino MEGA has a number of unused pins that are available for hacking and general awesomeness. We've made them available in a standard .100" pitch 20 pin header. You can wire all sorts of cool stuff up to it, and modify the software to your heart's content.

PINNAMEFUNCTIONLOCATION
1 5V This pin is connected to +5V from the power supply. -
2 GND This pin is connected to ground on the motherboard. -
3 D33 Digital I/O Port C, 4
4 D34 Digital I/O Port C, 3
5 D35 Digital I/O Port C, 2
6 D36 Digital I/O Port C, 1
7 D37 Digital I/O Port C, 0
8 D38 Digital I/O Port D, 7
9 D39 Digital I/O Port G, 2
10 D40 Digital I/O Port G, 1
11 D41 Digital I/O Port G, 0
12 D42 Digital I/O Port L, 7
13 D43 Digital I/O Port L, 6
14 D44 Digital I/O Port L, 5
15 D45 Digital I/O Port L, 4
16 D46 Digital I/O Port L, 3
17 D47 Digital I/O Port L, 2
18 D48 Digital I/O Port L, 1
19 D49 Digital I/O Port L, 0
20 D13 Arduino Debug Pin Port B, 7

Arduino Connector

The motherboard is a shield for the Arduino MEGA. As such, it has a bunch of downward facing pins that connect it to the Arduino. The Arduino and the motherboard are essentially one single unit. Once you plug them together, its a good idea to keep them plugged together.

 

Piezo

The motherboard has the option to attach a piezo buzzer. Since having a beeping, blinking MakerBot might be annoying to some, we've decided to make it optional. If you'd like to enable your piezo, simply solder a piezo buzzer like this one to the footprint shown below. If your piezo has a positive and negative, the positive pin is marked on the PCB.

 

SD Card

The motherboard has a standard SD card socket. It supports cards up to 2GB in size, and they must be formatted at FAT16. The motherboard can read files from the SD card and it can write files to it. Printing from SD card can significantly improve the build quality.

This is because the USB to Serial link is relatively slow, so high resolution prints that have many small line segments tend to print badly as the stepper motors can stop for some microseconds between line segments. This is completely eliminated when printing from the SD Card directly.

Another nice benefit of printing from SD card is that your MakerBot can be disconnected from the computer once the print has been started.

 

 
-Note: this is the shield board only, and you'll need to purchase your Arduino Mega separately.
Picture may differ from actual product. Some components may be of different color/manufactor

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x