Hephestos 2

More Views

Hephestos 2
Excl. Tax: $795.09 Incl. Tax: $993.86

Availability: In stock

Delivery time 2 - 3 weeks

3D Printer Hephestos 2 DYI Kit
Hephestos 2 is available for purchase in increments of 1
Description

Details

  • PRINTING SPEED

    • Maximum: up to 200 mm/s*
      *Subject to materials, profiles and software used.
  • OPERATING CONDITIONS

    • Optimum operating temperature range 15 ºC to 25 ºC.
  • RESOLUTION

    • Very high - 50 microns
      High - 100 microns
      Medium - 200 microns
      Low - 300 microns
  • DIMENSIONS

    • Product without PLA spool: 
      (x)450 x (y)516 x (z)571 mm (static) 
      (x)450 x (y)605 x (z)571 mm (dynamic)
      Product with PLA spool: 
      (x)450 x (y)516 x (z)661 mm (static)
      (x)450 x (y)605 x (z)661 mm (dynamic)

       

      Enclosure: (x)627 x (y)465 x (z)207 mm
      Printable area: (x)210 x (y)297 x (z)220 mm
  • MATERIALS

    • 1.75 mm diameter filament: PLA, wood, bronze, cooper and FilaFlex
  • EXTRUDER MECHANICS

    • Own design extruder with Double Drive Gear traction setting and filament guide to maintain compatibility with flexible or soft filaments.
      0.4 mm nozzle for 1.75 mm filament
      Finned dissipator with axial fan controlled by firmware (low noise)
      Cooling blower
      Sensor specifically designed for 3D printing (auto-levelling)
  • GENERAL MECHANICS

    • Powder-coated aluminium base and frame
      Hard chromed bars for the Y axis
      Lineal ball bearing for the Y axis
      Recirculating ball bearing guides with flat runner for the X and Z axes
      Cable chain
      Flexible couplings for the screwed rods of the Z axis
      3-point print bed levelling system with shock absorber
      Rapid system for changing print bed
  • ELECTRONICS

    • BQ Zum Mega 3D controller
      BQ Zum Inductive Sensor to aid levelling of the bed
      BQ Zum LCD Smart Controller graphical interface
      100K thermistor on the hot-end
      Heater cartridge: 40 W, 12 V
  • SOFTWARE

    • Marlin-derived firmware
      New features: auto-levelling, manual levelling using inductive sensor exclusively designed for 3D printing, power-saver system
      Improved user interface
      Recommended environment: Cura Software, slic3r, Repetier, Kisslicer
      Files accepted: .gcode
      Compatible operating systems: Windows XP or later, Linux and Mac OS X or later
  • COMMUNICATIONS

    • SD card reader
      Type B micro-USB port
  • BOX CONTENTS

    • Assembly guide 
      Warranty and FAQ 
      Structural elements 
      4 GB SD card (with preloaded 3D example models) 
      5 spare PTFE tubes 
      2 cleaning needles 
      Spatula 
      Gloves
  • WEIGHT

    • Product plus box - ~16 kg
  • LICENCE

    • Creative Commons - Attribution - Share Alike
  • HEATED BED KIT

    • 347x281x58 mm
      1x Power supply 24V 160W
      1x 5 pin right angle connector
      1x EU AC cable 1m
      4x Acrylic spacer
      1x Control board
      2x Screw M2.5x12 DIN912 zink
      1xHeatbed PCB 220x305mm
      8x Black bridle 
      1x Power cable 609mm
      2x Clip to guide cables
      1x Signal cable 650mm
      15x Round bumper foot
      Power: 160W 
      Warmup time (50ºC): ~2min.
      Warmup time (100ºC): ~11min.
      Warmup time (110ºC): ~20min.
      Maximum temperature: 110ºC
      1600 g
Additional Information

Additional Information

Printer Color Yellow

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x