- Multi application: The 3d print kit can upgrade for all kinds Prusa i3 DIY 3D printer, including CR-10, CR-10S, HICTOP, Anet, Anycubic,
Four functions: Mixed color, Dual color, Graded color and Single color.
- Mixed color & Single color: Upload the "KR-10S Mix" firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color.
- Dual color: Upload the " KR-10S Dual" firmware and it helps you to print samples with two different colors. Single color is also supported by this firmware.
- Graded color: Upload the " KR-10S mix" firmware and you can print samples with graded color by changing the mixing percentage on the LCD screen.
Mixed color, dual color, graded color and single color.
PLA, ABS, Wood, TPU, PVA, Nylon, HIPS.
Nozzle: 0.5mm 2 in 1 out nozzle
Accuracy: 100 microns (0.1 mm)
:Normal: 30mm/s, Max: 60mm/s
Layer Thickness: 0.1-0.3mm (up to you)
Hot End Heater: There are two heaters for different DIY 3D printers: 12V 40W, 24V 60W. (The default one is 24V. Please find another 12V heater in the package.)
Temperature: Max 270 degree centigrade
Control board: The kits without control board, please purchase control board which support 2 extruders. MKS V1.3 is recommend. You also can buy our control board from our website.
LCD screen: 2004 LCD Module Control, Interface (The kits without LCD screen, please purchase it separately if needed).
Both open-source and commercial software, such as Cura, Repetier-Host, or Simplify 3D, the Maker Select Plus 3D Printer is compatible with Windows, Mac OS X, and Linux.
Number of Nozzles: 1
Feeding Process: 2 in 1 out
Nozzle Diameter: 0.5mm
Printing Accuracy: ±0.1mm
Voltage: DC 24V
Filament Diameter: 1.75mm
Product Size: 260*150*61mm
Packing Size: 265*160*75mm
Net Weight: 1.3kg
Package Weight: 1.5kg
1x Extruder Kit For 3D Pinter