1.75mm 1kg/2.2lb PLA 3D Printer Filament For Mendel Printrbot Reprap Prusa

SKU
1164902
0 In stock
As low as DKK557.50 DKK446.00
-
+
1.75mm 1kg/2.2lb PLA 3D Printer Filament For Mendel Printrbot Reprap Prusa is available to buy in increments of 1
Overview
1.75mm 1kg/2.2lb PLA 3D Printer Filament For Mendel Printrbot Reprap Prusa
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
Features:

-Pure PLA, no impurities, bright color, high toughness.
-Consumables in the use of the material is very uniform, not easy to plug.
-The large part model can be printed without a heated bed and the corners do not tilt, with good tensile strength and ductility.
-Has good mobility and transparency, low shrinkage, smooth and delicate.
-Widely used in industrial machinery and plastic parts, model machinery, electronic appliances, instrumentation and other industrial fields.


Instructions for use:

-Printer extrusion head temperature control in the 190-230 degrees Celsius, the support board without heating, the line at 50 degrees Celsius dry after 2-4 hours to use, forming better, smooth and delicate silk.

Specifications:

Material: PLA
Color: White, Blue, Red, Transparent
Size: Approx. 20x6.5cm/7.87"x2.55"
Wire diameter: 1.75mm
Print temperature: 195-1230°
Density: 1.25 ± 0.05 g / cm³
Length: 340m
Print speed: 40-100mm / s
Bending modulus: ≥ 60Mpa
Tensile strength: ≥ 60Mpa
Breaking elongation: ≥3%
Solution flow rate: 5-7 g / 10 min (190 ° C, 2.16 kg)
Weight: 1321g


Package Included:

1x 3D Printer Filament

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account