●Three different colors of wire can be used, single nozzle extrusion, three kinds of wire complex color switching can be realized inside
●The printing effect is rich in color, and the appearance quality is stable.
●High cleanliness internal cavity, clear pipeline, no blockage
●The mounting bracket reserves the mounting holes in the direction to meet the installation requirements of x, y, and z directions,
●M3 mounting holes reserved, support the installation of 40 fans and 30 fans, which is convenient for customers to use;
●Three sets of heating and temperature measuring holes are reserved to facilitate the routing; (the actual use requires two sets of heating rods)
1. When the first time use, during the three kinds of filaments, enter the throat, the three extruders need to manually fed into the filament.
And the filament is not more than 10mm per time until regularly printed.
2. Slice setting, when the extruder switches to the waiting state, the pumping wait setting cannot be used, otherwise it will be blocked;
3, the pumping setting should not be too long, not more than 3mm is appropriate
4, the heat sink must use a fan to force heat dissipation and keep it open during the heating. It is recommended to use two sets of fan heat dissipation to ensure uniform heat dissipation.
5. The product is connected to the inner and has a little risk of backflow.Specifications:
1. Suitable filament: PLA/ABS
2. Feeding method: remote feeding
3. Adapting extruder: bulldog, mk8, and other extruders
4. Dimensions: main body φ42×54
5. Weight: 168g
6. Material: aluminum alloy
8. Voltage: 12v
9. Cartridge Heater: 12v 40W
10. Throat tube built-in anti-blocking material Teflon tube
1 x 3 in 1 out extruder
1 x cartridge heater & temperature sensor