- The power density is limited to less than 1 W/cm2 depending on the temperature resistance of the material; for non-continuous conditions, the power density can reach 1.4 W/cm2.
- Its continuous use working temperature should be less than 240 °C, instantaneous not exceeding 300 °C
- Thermal conductivity is good, and the current density can reach 3W/cm2 when the working zone temperature does not exceed 240°C.
- Constant temperature 40-150 degrees
- Allow operating temperatures less than 150°C
- Flexible Waterproof Silicon Heater Pad
- For 3D Printer
- Size: (L)X(W)50*100mm
- Line length 500mm
- Use: 3M double-sided adhesive on the back, can be directly attached to the heated product.
* Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
* Please understand that colors may exist chromatic aberration as the different placement of pictures.
1 x Flexible Waterproof Silicon Heater Pad