Function: Shockproof, Anti-friction, to protect the printer,
when the printer is in direct contact with the desktop or the ground, it will be weared out.
How to install:
1. Turn the YZ frame on the side and insert the antivibration foot inclined, then rotate the foot until you squish the rim inside the extrusion.
2. Repeat this process on all 4 feet. Place them 2-3 cm from the end of each extrusion.
20 x Antivibration feet
20 x 2020 T Sliding Nut Block Square nuts M4
20 x M4 screws
1 x wrench