250*250*0.5mm Polyetherimide PEI Sheet With 3M Backing Glue For 3D Printer Heated Bed

SKU
1399411
0 In stock
As low as DKK148.75 DKK119.00
-
+
250*250*0.5mm Polyetherimide PEI Sheet With 3M Backing Glue For 3D Printer Heated Bed is available to buy in increments of 1
Overview
250*250*0.5mm Polyetherimide PEI Sheet With 3M Backing Glue For 3D Printer Heated Bed
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
Specifications:

Material: Polyetherimide
Color: Black/ White/ Transparent (for option)
Size: 250*250*0.5mm


Features:

1. PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.
2. PEI (polyetherimide) is amber transparent solid, any additives of PEI particle images do not add have low inherent flame retardancy and smoke, the oxygen index of 47% combustion of UL94-V-0 grade, the density is 1.28~1.42g/cm3.
3. High temperature stability, even if it is non reinforced PEI, it still has good toughness and strength.
4. It has excellent mechanical properties, radiation resistance, high and low temperature resistance and wear resistance, and can also be transmitted through microwave.
5. Good flame retardancy, chemical resistance and electrical insulation characteristics.


How to Use:

1. Special note - Please remove both sides of the teal colored protective film before using.
2. There are two methods to attaching the PEI to your print bed.
The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.
The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.
3. Once the PEI sheet is attached, re-level your print bed and you are ready to go!
4. It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.


Package included:

1 x 250*250*0.5mm PEI Sheet 










Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account