3D Printer FFC FPC Flexible Display Cable for Lerdge Board

More Views

3D Printer FFC FPC Flexible Display Cable for Lerdge Board
Excl. Tax: $6.12 Incl. Tax: $7.65

Availability: Out of stock

3D Printer FFC FPC Flexible Display Cable for Lerdge Board
Description

Details

Overview:

0. FFC soft cable 0.5 pitch 36pin, the direction is of the same direction
1. P = bit = core = pin (number of copper)
2. Cable length optional. 30cm, 70cm and 100cm.
3. Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm)
    Spacing algorithm: bus width / (number of pins+ 1)
4. Direction (check the ends of the cable): A with the same direction (metal surface in the same side)
5. Test with Lerdge board. Use the board test with the 2 meters cable (without shielding tape), and with the cable winding the stepper motor. The touch screen display operation is normal, no interference phenomenon, the test passed.

Package Included:

1 x 100/70/30cm Display Cable 












Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x