3Pcs HTD5M-300 Timing Pulley Belt Rubber Drive Arc Teeth 20mm Width 1/5'' Pitch For 3D Printer

More Views

3Pcs HTD5M-300 Timing Pulley Belt Rubber Drive Arc Teeth 20mm Width 1/5'' Pitch For 3D Printer
Excl. Tax: $16.37 Incl. Tax: $20.46

Availability: Available to order

Delivery time 1 - 2 weeks

3Pcs HTD5M-300 Timing Pulley Belt Rubber Drive Arc Teeth 20mm Width 1/5'' Pitch For 3D Printer
Description

Details

Features:
 
Dynamic flexing is good, anti-cracking performance
Ozone excellent performance
Resistance to aging, heat, oil, wear-resistant
Synchronous belt drive with accurate transmission ratio, no slip, constant ratio can be obtained, precision transmission, smooth transmission, shock absorption, noise, transmission speed ratio range
 
 
Specification:
 
Name: HTD5M-300 Belt
Style: HTD5M Series Belts Positive Drive
Model:HTD5M-300 (HTD300-5M)
Belt Width: 20mm
Material: Chloride butyl rubber + Glass fibre + High elastic nylon canvas
 
Parameters:
 
Teeth type:Circle-arc tooth
Teeth number:60
Whether standard parts: Standard parts
Pitch: 5.00mm
Tooth height: 2.06mm
Belt thickness: 3.8mm
Minimum allowable bending diameter: 25
Tensile strength: ≥160N/mm
Reference load: 130N/mm
Elongation: ≤4.0%
Hardness(shore A):75±5
Adhesion strength of cloth: 6N/mm
Adhesion strength of core rope: 400N/mm
Gear shearing intensith: 50N/mm
 
Package include:
 
3 x 20mm HTD5M-300 Timing Belt
 
Note:
 
1. Prohibited twists and turns, so as not to damage the skeleton material, affecting the belt strength.
2. Do not scratch the belt, so as not to cause early damage to the belt.
3. Prohibit the long-term and oil, water and other substances in long-term contact, to avoid contact with chemicals.
4. In the replacement of timing belt, belt tension must be reduced to a minimum in order to remove, forbidden timing belt in the case of high tension, the use of non-professional tools hard pry down.
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x