400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp for EngravingManual: WS55-180Specification:
|Brushless motor parameters|| |
|Color||black and silver|
|Working voltage||48V DC|
|Insulation resistance||> 2 ohms|
|Insulation dielectric strength||400V|
|Axis collet length||43mm|
|Diameter of Axis collect holder||16mm|
|Spindle net weight||1.1 KG|
|Brushless DC speed driver controller parameters|| |
|Maximum speed||Over 20000RPM|
|Speed control||1.Regulation resistance,|
|Alarm output: AL signal||This port and the ground have a 5V alarm output output|
|Power light||Green LED (the led is on once power on)|
|Operation condition light||Red LED (The led flash one times continuas when the device is suspended)|
|Insulation resistance||>100MΩ at normal temperature and pressure|
|Insulation strength||0.5KV, 1 minute at normal temperature and pressure|
|Storage temperature||-20℃- +65℃|
|Working humidity||< 80%,No frost, frost free|
|Working Vibrating||5.9m/S² MAX|
|Spindle fixture|| (Higher precision, low deformation rate, smooth inner wall)|
1. B rushless, low interference, in addition to the brushless motor brush, the most immediate change is no brush spark generated when the motor running, thus greatly
reduce the electric spark interference of remote radio equipment.
2. Low noise, smooth operation, brushless motor without brush, less friction force during operation, smooth operation, low noise will be many.
3. Long life and low maintenance costs, less brush, brushless motor wear is mainly on the bearing, from the mechanical point of view, brushless motor is almost a free maintenance of the motor.
Speed driver controller
Speed/Current alike close loop technology, smooth rotation.
Pure hardware design, high-speed, high noise immunity.
F/R(forward / reverse control) Rotation, soft shift function.
Over current, short circuit protection (red LED indicator).
1 x Spindle motor with with ER11 3.175 collet
1 x WS55-180 Speed driver controller (With potentiometer and switch)
1 x Spindle fixture (Includes 4 fixing screws)
1 x English manualMore Details: