500W Spindle Motor + 110V/220V Speed Governor + 7pcs ER11 Spring Collets + Clamp
|Input||AC110V/220V ± 10%50/60Hz|
|Speed||Up to idle up to 12,000 rev / min|
Material: Spring steel
Spring Collets Size:1/8",1/16",1/4",3/16",5/32",3/32",7/32"
Suitable For: Boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing.
- Small size, easy to carry.
- Fast speed, high efficiency.
- Durable, long working hours.
- Application: For engraving machine, fit for collet: ER11 size: 1mm / 1.5mm / 2mm / 2.5mm / 3mm / 3.5mm / 4mm / 4.5mm / 5mm / 5.5mm / 6mm / 6.5mm / 7mm.
How To Use?
1. Insert the tip into the pressure cap, gently turn the retainer until the pressure cap eccentric retainer portion.
recessed groove along the direction of the arrow evenly push hard retainer, you can mount the internal pressure cap.
2. The pressure cap with retainer mounted together on a spindle or chuck body, the cylindrical tool shank after.
wiping loaded clamping hole, use a wrench to tighten the pressure cap even force until the date before the tool folder in prison use.
(Note: not in the tool and avoid tightening pressure cap installed to avoid damage to the retainer).
3. ATC with a wrench loosen pressure cap out of the chuck and the tool, remove the tool, retainer direction of the arrow.
push hard to quit, and then need to put on retainer to the other aperture.
1 Pc x 500W Air-Cooled Spindle Motor
1 Pc x 110V / 220V Speed Governor
7 Pcs x ER11 Spring Collets (Respectively are
size 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4")