Adhesive

Grid List

Set Descending Direction

1-10 of 25

Page:
  1. 1
  2. 2
  3. 3
  1. 30m*25mm  Polyimide Tape Heat Resistant Insulating tape
    Excl. Tax: $5.97 Incl. Tax: $7.46

    30m*25mm Polyimide Tape Heat Resistant Insulating tape Learn More
  2. PolyimideTape 10mm x 32m
    Excl. Tax: $4.44 Incl. Tax: $5.55

    PolyimideTape 10mm x 32m Learn More
  3. Polyimide Tape Heat Resistant Wide 100mm x 32m
    Excl. Tax: $22.19 Incl. Tax: $27.74

    Polyimide Tape Heat Resistant Wide 100mm x 32m Learn More
  4. 1 meter insulate tape. 5 cm width
    Excl. Tax: $0.77 Incl. Tax: $0.96

    1 meter insulate tape. 5 cm width Learn More
  5. 1 meter insulate tape. 2,2 cm width
    Excl. Tax: $0.46 Incl. Tax: $0.58

    1 meter insulate tape. 2,2 cm width Learn More
  6. Taulman ComPlete Nylon Glue
    Excl. Tax: $19.28 Incl. Tax: $24.10

    Out of stock

    Taulman ComPlete Nylon Glue Learn More
  7. 160mm*30m Blue Reprap Bed Tape High Temperature Resistance Masking Tape for 3D Printer
    Excl. Tax: $60.74 Incl. Tax: $75.93

    160mm*30m Blue Reprap Bed Tape High Temperature Resistance Masking Tape for 3D Printer Learn More
  8. Magigoo PC - The 3D printing adhesive
    Excl. Tax: $18.36 Incl. Tax: $22.95

    WHAT:

    MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This

    adhesive for professional use makes sure prints stick firmly when the print-bed is hot and

    that the part is easy to remove once it cools. This unique and innovative mechanism

    means that no tools are needed to remove prints from the bed. They just pop off when the

    bed cools down.

    WHY:

    The strength and toughness of PC make it an ideal FDM material for the production of

    functional prototypes as well as end use part, nonetheless the material does present some

    printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be

    used in high temperature applications. However, having a high Tg can make it very difficult

    to print using desktop printers, as these are usually not equipped to cater for the high

    printing temperatures required to print virgin PC. Virgin PC in fact tends to warp

    considerably when printed at an insufficient bed temperature (<130 ÂșC), in non-heated

    enclosed chambers without the use of an appropriate bed adhesive. Certain

    manufacturers have improved the printability of PC by the use of plasticizers or blending

    with other materials. Nonetheless when using these solutions some difficulties are still

    encountered, firstly with adhesion especially on larger parts still can be an issue. In

    addition to this some bed adhesion sheets have been proposed to avoid the warp

    encountered in larger prints, but in this case there is a high tendency that the adhesion

    sheet being used fuses irreversibly to the print. This means that the expensive sheet

    needs to be removed very often and also incurs a lot of post processing and cleaning.

    Magigoo PC can be used on glass or multiple other surfaces. Use on other plastic based

    surfaces, including sheets is recommended to provide strong adhesion and preventing the

    part to fuse to the sheet.

    HOW:

    MAGIGOO PC has been designed and tested to work with different PC filament brands.

    As the composition of each plastic is a little different, the ideal settings for MAGIGOO PC

    may vary.

    • Shake the bottle.
    • Apply to the desired area by pressing the nib on the bed (activating the inner valve)

    and spreading as needed.

    • Print according to the filament/printer manufacturers recommendations
    • Allow to cool and Remove. The print should pop right off
    • Clean - Use a damp cloth to wipe off.

     

    SAFETY:

    Using this product with other than PC type filaments might cause over adhesion and

    damage your build surface.

    Tips:

    For larger prints a 20 mm brim with multiple layers is recommended

    In cases of excess adhesion, it is recommended to wet print bed with a small amount of

    water slowly work it below the part, this should make part removal easier

    Learn More
  9. Magigoo PP- The 3D printing adhesive
    Excl. Tax: $18.36 Incl. Tax: $22.95

    Magigoo PP- The 3D printing adhesive Learn More
  10. PolyimideTape 6 mm x 32 m
    Excl. Tax: $5.20 Incl. Tax: $6.50

    PolyimideTape 6 mm x 32 m Learn More

Grid List

Set Descending Direction

1-10 of 25

Page:
  1. 1
  2. 2
  3. 3
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x