Cloned RAMBo 1.4 Motherboard All On One Integrated PCB with 2004 LCD Display For 3D Printer Part

SKU
1603369
0 In stock
DKK1,143.75 DKK915.00
-
+
Cloned RAMBo 1.4 Motherboard All On One Integrated PCB with 2004 LCD Display For 3D Printer Part is available to buy in increments of 1
Overview
Cloned RAMBo 1.4 Motherboard All On One Integrated PCB with 2004 LCD Display For 3D Printer Part
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
Descriptions:
 
This is RAMBo v1.4. The RAMBo board is an all in one 3D printer motherboard. It is a full remix of our RAMPS design with the MEGA and stepper drivers all on one integrated PCB. That is where it got the name RAMBo - (R)epRap (A)rduino-(M)ega-compatible (M)other (Bo)ard. This is the same board you will find in the Lulzbot Taz6 Printer
 
RAMBo v1.4 - The major difference over the previous version is the integrated LCD connector for Smart LCD Controllers. The EXT2 and SPI headers were re-arranged to remove the need for an adapter. This change is backwards compatible with firmware for previous versions of Rambo that normally utilize the RamboLCD. 
 
Features:
 
5 x integrated 1/16th microstep motor drivers, 5 PWM Mosfet outputs, 4 thermistor inputs, digital trimpot (no tiny knobs to tweak), SMPS supports hostless printing on power supply voltages from 10-24V DC, 3 independent fuse protected power rails, LUFA USB, high quality connectors
 
Logic: 
 
● MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmwares
● Crystals for both usb and mcu (timing accurate to 10ppm)
● 4 Thermistor jacks
● All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
● 2 channel SDRAMPS compatible SPI breakout

Package Included:

RAMBO 1.4a main control board*1
Data line*1
4PIN terminal*3
2PIN terminal*2
2004LCD LCD*1
Gray cable *2






Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account