300W 48V High Speed Spindle Motor ER11A Collect with 52mm Clamps For CNC Machine
|Work voltage||12-48V DC|
|Current||Maximum current 6A|
|Absolute temperature rise||15℃|
|Absolute resistance|| Over 2MΩ|
|Collet length||tool bar 35mm|
|Motor whole length||170mm|
|Spindle radial pulsation||about 0.01mm|
1.The input line is connected to LN of the power supply, the output line a positive electrode and a negative electrode are connected to the motor so that the main shaft can rotate normally
2.Power supply 1 and 4 connect to spindle motor,8 and 9 connect to 220V voltage,7 connect to earth wire.One power supply can connect with 3 air-cooled spindle motor,2 and 5 are a set,3 and 6 are a set.
1.High rotation speed,low noise.
2.This spindle is with forced-air cooling,can work for a long time.
3.Providing an useful ER11A 3.175mm CNC collet.
4.Can be used to engraved metal and other non metallic material.
5.Perfect for engraving PCB,acrylic and drilling holes,etc.
6.Potentiometer is used to adjust the output voltage to control speed.
1 x Spindle Motor
1 x Mount Bracket with screws
1 x Power Supply 48V 360W
1.Please allow a bit error due to manual measurement.Pls make sure you do not mind before you bid.
2.The color may have different as the difference display,pls understand.