DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Machine

More Views

DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Machine
Excl. Tax: $165.70 Incl. Tax: $207.13

Availability: Available to order

Delivery time 1 - 2 weeks

DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Machine


DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Engraving Machine
WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller. 
Voltage range is from 20V DC to 50V DC.
The controller can drive the DLDC motor with HALL or without HALL.
Motor Material: Metal
Brushless motor parameters:
Working voltage48 V DC
Power500 W
Speed12000 r/min
Torque0.45 (N.m)
Insulation resistance> 2 ohms
Insulation dielectric strength400 V
Diameter55 mm
Distance0.6 (N.m)
Insulation resistance> 2 ohms
 Insulation dielectric strength 400 V
diameter55 mm
The spindle radial runout about0.01 to 0.03
Spindle net weightabout 1.4KG
ApplicationCan be used for metal or non-metal materials such as carving. The spindle with forced air cooling, can work long hours.

Brushless DC speed driver controller parameters:
Rated voltage20-50V DC
Rated current8A
Limited current10A
Maximum speedOver 20000RPM
Speed control1.Regulation resistance, 
2.External voltage:10VDC
Alarm outputAL signal:This port and the ground have a 5V alarm output output
Power lightGreen LED(The led is on once power on)
Operation condition lightRed LED(The led flash one times continuas When the device is suspended)
Insulation resistance>100MΩ at normal temperature and pressure
Insulation strength0.5KV, 1 minute at normal temperature and pressure
Storage temperature-20℃ ~ +65℃
Storage humidity0~95%RH
Working temperature0-45℃
Working humidity< 80%,No frost, frost free
Working Vibrating5.9m/S² MAX

Main Features:
Brushless motor:
1. brushless, low interference, in addition to the brushless motor brush, the most immediate change is no brush spark generated when the motor running, thus greatly reduce the electric spark interference of remote radio equipment.
2. low noise, smooth operation, brushless motor without brush, less friction force during operation, smooth operation, low noise will be many.
3. long life and low maintenance costs, less brush, brushless motor wear is mainly on the bearing, from the mechanical point of view, brushless motor is almost a free maintenance of the motor
Speed driver controller:
1. Speed/Current alike close loop technology, smooth rotation.
2. Pure hardware design, high-speed, high noise immunity.
3. F/R(forward / reverse control) Rotation, soft shift function.
4. Over current, short circuit protection (red LED indicator).
Package Included:
1 x Engraving machine principal axis
1 x Stationary fixture
1 x Drive Controller
2 x line(as picture)
1.Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.
2.The color may have different as the difference display, pls understand.
3. There are no instructions included in this kit.Professional Installation Is Highly Recommended!
More Details:

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.