• Save 60%

Diamond Fullcolor Nozzle for 1.75mm filament

SKU
Diamond Fullcolor Nozzle
In stock
Special Price DKK100.00 DKK80.00 was DKK250.00
-
+
Diamond Fullcolor Nozzle for 1.75mm filament is available to buy in increments of 1
Overview
Diamond Fullcolor Hotend nozzle. 5in1out nozzle for multi color/material 3D printing
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


We have AAA credit rating

Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
Default

,

31 units available

The Diamond Nozzle is a brass nozzle for 3D printing in multiple colors and materials. It has five filament inputs for 1.75mm filament and a common 0.4mm nozzle orifice.

The Diamond Nozzle is designed with the smallest possible mixing chamber, to make color shifts as fast as possible and avoid unnecessary filament waste. To ensure rapid nozzle heat up the nozzle have been constructed as compact as possible and features a cutout for standard 40W heater cartridge and leaded thermistor

Benefits of the Diamond Nozzle

  • Easy calibration
  • Better precision compared to multi-nozzle printing
  • Prints with 5 different colors
  • Minimal filament waste
  • 5 inputs for 1.75 mm filament
  • Common 0.4 mm nozzle orifice
  • Smallest possible mixing chamber for minimal waste and fast color change
  • Cutout for standard OD6mm heater cartridge and leaded thermistor
  • 5 threaded mounting holes for special designed heat sinks

Diamond Nozzle Features

  • 5 inputs for 1.75 mm filament
  • Common 0.4 mm nozzle orifice
  • Smallest possible mixing chamber for minimal waste and fast color change
  • Cutout for standard OD 6mm heater cartridge and leaded thermistor
  • 5 threaded mounting holes for special designed heat sinks

Links

The Diamond Hotend wiki page at reprap.org

3D printed parts for the Diamond Hotend on Thingiverse

The Diamond Hotend on Kickstarter

FAQ

Question: My Diamond Hotend is clogged, how do i clean it?

Answer: Unplug the bowden tubes on the heated Diamond Hotend. Use a heated 2mm hex key to insert in each heatsink, all the way into the nozzle tip and pull out quickly to remove any plastic. Repeat process until clean. No need to disassembly the heatsinks! If nozzle tip is clogged, use a 0.4mm drill/wire to clean from outside.

Question: My Diamond Hotend is leaking, how do i stop the leak?

Answer: After mounting the heatsinks, heatup the nozzle to 240-250 degree celcius and tighten the heatsink with a plier. If still leaking you can use some PFTE tape on the heatsink threads. Never use cooling paste on the threads!

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account