E3D Plated Copper Nozzle - V6

SKU
V6-NOZZLE-COP
In stock
As low as DKK108.50 DKK86.80
-
+
E3D Plated Copper Nozzle - V6 is available to buy in increments of 1
Overview
Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can't handle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


We have AAA credit rating

Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
 

V6 Plated Copper Nozzles


These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.

In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.

Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.

This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle.

Read all about it on our blog!

Combine with our plated copper blocks for the ultimate extrusion pairing. No need for hot tightening, this pairing just works.

 

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker.

  NUMBER OF DOTS    DIAMETER  
2 Diagonal 0.15mm
0 0.25mm
1 0.30mm
2 0.35mm
3 0.40mm
6 0.50mm
4 0.60mm
5 0.80mm
 
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!