EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
EasyPrint PETG is the perfect addition for you filament collection. It has many unique features which makes it one of the most versatile filaments in our portfolio. You can make beautiful prints in ""vase mode"" with more than 90% light transmission and almost no haze. EasyPrint PETG doesn´t release any toxic or irritating fumes when printing.
EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ˚C
EasyPrint PETG sticks on BuildTak, PEI sheet and glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use
- EasyPrintsticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60° C
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
Material PETG Diameter 2.85mm Tolerance ± 0.02 mm Heated build platform required No, but recommended Print Temperature 210 - 235° C Weight Filament 50g
Physical Test method Value Density ASTM D1505 1.27 g/cm3 Water Absorbation (24 hour immersion) ASTM D570 0.2 % Rockwell hardness ASTM D785 116 R-scale Shrinkage ASTM D955 0.2 - 0.5 % Mechanical Tensile strenght @ Yield ASTM D638 53 MPa Tensile strenght @ Break ASTM D638 26 MPa Elongation @ Yield ASTM D638 5.0 % Elongation @ Break ASTM D638 70 % Flexural Strenght ASTM D790 80 MPa Flexural Modulus ASTM D790 2150 MPa Izod Impact Strenght (Notched @ 23°(73°F) ASTM D256 90 J/m Thermal Heat Distortion @ 0.455 Mpa ASTM D1003 74° C Vicat Softening Temperature ASTM D1525 83° C Optical Light Transmittance ASTM D1003 90 %
- Wide Temperature span