Bondtech Extruder

Grid List

Set Descending Direction

11-20 of 55

  1. BondTech Motor Cable JST-XH6 -  JST-XH4
    Excl. Tax: $1.68 Incl. Tax: $2.10

    This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.

    Controller side      Motor side
    PIN 1  —————– PIN 1
    PIN 2 —————– PIN 4
    PIN 3 —————– PIN 3
    PIN 4 —————– PIN 6

    Dimensions 70 cm
    Learn More
  2. BondTech Dupont Cable
    Excl. Tax: $1.68 Incl. Tax: $2.10

    Dupont cable 4-pin connector to 6-pin connector.
    This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.

    Controller side           Motor side
    PIN 1  —————– PIN 1
    PIN 2 —————– PIN 4
    PIN 3 —————– PIN 3
    PIN 4 —————– PIN 6

    Dimensions 70 cm
    Learn More
  3. BondTech Adapter Cable Raise3D Single
    Excl. Tax: $1.68 Incl. Tax: $2.10

    Dimensions 10 cm
    Learn More
  4. BMG Extruder Clone Dual Drive Upgrade Bowden Extruder For 1.75mm filament 3D Printer Parts
    Excl. Tax: $32.74 Incl. Tax: $40.93

    BMG Extruder Clone Dual Drive Upgrade Bowden Extruder For 1.75mm filament 3D Printer Parts Learn More
  5. Nema 17 Stepper Motor + BMG Extruder Clone Dual Drive Upgrade Bowden Extruder Kit For 1.75mm filament 3D Printer Ender-3/CR-10
    Excl. Tax: $41.62 Incl. Tax: $52.03

    Nema 17 Stepper Motor + BMG Extruder Clone Dual Drive Upgrade Bowden Extruder Kit For 1.75mm filament 3D Printer Ender-3/CR-10 Learn More
  6. 1.75mm / 3.0mm Bondtech Extruder Two Way Feeding Wheel for 3D Printer
    Excl. Tax: $9.49 Incl. Tax: $11.86
    1.75mm / 3.0mm Bondtech Extruder Two Way Feeding Wheel for 3D Printer Learn More
  7. BondTech BMG ALU-Mount
    Excl. Tax: $17.29 Incl. Tax: $21.61

    The Mount is clamped between the motor and the rear housing of the extruder.

    It can be rotated in 90 degrees increments in order to mount the extruder according to your needs.

    Mounting holes in the bottom flange is 4.2 mm in diameter. vertical 18.0 mm, horizontal 50.0 mm

    Learn More
  8. BondTech Upgrade Kit for TEVO Tornado
    Excl. Tax: $98.99 Incl. Tax: $123.74

    This extruder upgrade kit for the Tevo Tornado, Creality CR10, Ender, and other printers that uses the same type of mounting plate will replace the original feeder.

    It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the extruder never looses grip of the filament so grinding, slipping is a thing of the past.

    The bowden tube is securly held in place by the 4mm industry standard  integrated push-fit connector.

    This kit comes in 3 versions. Without mount, With mount and With mount for a filament sensor.

    E-steps needs to be updated to 415 and the rotation direction of the motor needs to be reversed, please see the installation guide of how to do it that you will find under the tab "Installation guide"

    This kit contains no motor, the original motor is used.

    Learn More
  9. Groove Mount Bowden Adaptor - 3mm Filament (1/4" OD Tubing)
    Excl. Tax: $6.10 Incl. Tax: $7.63

    Groove Mount Bowden Adaptor - 3mm Filament (1/4" OD Tubing) Learn More
  10. BondTech Raise3D DualDirect upgrade
    Excl. Tax: $221.85 Incl. Tax: $277.31

    After many request for a compact, lightweight dual directdrive extruder setup for the Raise3D N2 printers we are proud to present our newest product! Learn More

Grid List

Set Descending Direction

11-20 of 55

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x