Buy 8 or more spools of Devil Design and get 20% discount. You can mix any color, type or size.

Please note that filament is categorized as a consumer product with limited shell life and we do not accept returns of any filament. Incorrect storing and subject to water or sunlight will damage the filament. We recommend to store any filament in a dark and dry environment.

You are obligated to examine your filament on reception and if you have any doubt about the quality, you must contact us immediately.

Grid List

Set Descending Direction

1-10 of 295

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. BCN3D Filaments PA - 2.85 mm - 750 g - Natural
    Excl. Tax: $74.05 Incl. Tax: $92.56

    Overview

    PA (Polyamide) is an engineering plastic, characterised by its great resistance to impact and able to work continuously at a temperature of up to 120 ºC for an extended period of time. Its semi-flexible behaviour derives from a semicrystalline structure, which impart strength and durability, best suited for the most demanding technical applications. A low coefficient of friction allows for a short-term use in contact with moving parts.

    Compatibility: All BCN3D Printers.

    Applications

    • Strong and flexible parts
    • Structural components exposed to a harsh environment
    • Parts demanding high fatigue endurance
    • Bearings, nuts, rivets, washers and gears
    • Cams, rollers, snap-fit joints and sliding components
    • Plugs, connectors, jigs and fixtures
    • Electronic covers and tool handles

    Properties

    • Exceptional impact resistance and good strength
    • Low friction coefficient
    • High abrasion resistance
    • Thermal resistance (upt to 120ºC)
    • Good resistance to oil and alkali
    • Strongly hygroscopic
    • Thermomechanical properties dependent on environmental humidity

    High-performance material with flexible applications

    PA is a technical and competent material with an excellent impact strength and elongation at break. However, all this impact strength is compensated by a low level of stiffness that allows flexible applications.

    High abrasion resistant

    Nylon is abrasion resistant due its low friction coefficient and It is a good choice for end-use durable parts

    Parts demanding high fatigue endurance

    Nylon is ideal for strong and flexible parts demanding high fatigue endurance

    How to print

    Printer setting

    Extruder temp.
    220° C - 250° C
    Bed temp.
    95° C
    Cooling fan
    -
    Speed
    30-60mm/s
    Min. layer height
    ≥0.1mm
     

    For BCN3D Cura users:

    Get a proper printing profile for PA using the ones integrated into the BCN3D Cura. Download the latest version of BCN3D Cura.

    Bed adhesion:

    To ensure good bed adhesion use Magigoo PA.

    Recommendations:

    • Store it in an airtight container with desiccant.
    • Dry filament before printing. Place it in an oven or in a dehydrator at 50ºC for 6 to 8 hours
    • Enclosure is required for BCN3D Sigma and Sigmax printers.
    Learn More
  2. BCN3D Filaments PAHT CF15 - 2.85 mm - 750 g - Black
    Excl. Tax: $110.93 Incl. Tax: $138.66

    Out of stock

    BCN3D Filaments PAHT CF15 - 2.85 mm - 750 g - Black Learn More
  3. BCN3D Filaments PP - 2.85 mm - 700 g - Natural
    Excl. Tax: $74.05 Incl. Tax: $92.56

    Overview

    PP (Polypropylene) is a semycrystalline thermoplastic, known for its resistance to chemical agents. It is completely inert and does not easily interact with any substance, for this reason it is commonly used for the packaging of food and chemicals.

    It is a flexible and durable material, with a high resistance to impacts and wear.

    Compatibility: All BCN3D Printers.

    Applications

    • Ideal for light parts
    • Commonly used in bottles, packaging and containers
    • In automotive for non-structural areas of the body
    • Plugs and stoppers
    • Chemically aggressive environments
    • Living hinges
    • Pipes, joints and elements in contact with water

    Properties

    • Exceptional resistance to aggressive chemicals such as alkali, acids and organic solvents
    • Lightweight and clear
    • Flexible and resistant to impacts
    • Durable and resistant to fatigue, even at low temperature (-20 ºC)
    • Good thermal resistance, up to 100 ºC
    • Hydrophobic, non-stick surface

    High-performance material with flexible applications

    Lightweight material with excellent chemical resistance and fatigue life suitable for wet environments. It has an elongation at break and a stiffness superior to PA that allows it to be used for flexible applications in aggressive environments.

    Chemical resistance

    Due to its chemical composition, each thermoplastic polymer is characterised by a different resistance to the different classes of chemicals, including apparently harmless substances such as food and cleaning products.

    How to print

    Printer setting

    Extruder temp.
    220° C - 240° C
    Bed temp.
    70° C
    Cooling fan
    100%
    Speed
    40-80mm/s
    Min. layer height
    0.1 - 0.2mm
     

    For BCN3D Cura users:

    Get a proper printing profile for PP using the ones integrated into the BCN3D Cura. Download the latest version of BCN3D Cura.

    Bed adhesion:

    To ensure good bed adhesion use Magigoo PP.

    Recommendations:

    Enclosure is required for BCN3D Sigma and Sigmax printers.

    Learn More
  4. BCN3D Filaments PP GF30 - 2.85 mm - 700 g - Black
    Excl. Tax: $155.30 Incl. Tax: $194.13

    BCN3D Filaments PP GF30 - 2.85 mm - 700 g - Black Learn More
  5. Cleaning filament, 2.85mm,Natural,0.1kg/pcs
    Excl. Tax: $10.40 Incl. Tax: $13.00

    Cleaning filament, 2.85mm,Natural,0.1kg/pcs Learn More
  6. Copper3D MD¹ Flex - 2.85 mm - 500 g - Dark Blue
    Excl. Tax: $78.34 Incl. Tax: $97.93

    Copper3D MD¹ Flex - 2.85 mm - 500 g - Dark Blue Learn More
  7. Copper3D MD¹ Flex - 2.85 mm - 500 g - Red
    Excl. Tax: $78.34 Incl. Tax: $97.93

    Copper3D MD¹ Flex - 2.85 mm - 500 g - Red Learn More
  8. Copper3D MD¹ Flex Sample - 2.85 mm - 50 g - Dark Blue
    Excl. Tax: $8.26 Incl. Tax: $10.33

    Out of stock

    Copper3D MD¹ Flex Sample - 2.85 mm - 50 g - Dark Blue Learn More
  9. Copper3D MD¹ Flex Sample - 2.85 mm - 50 g - Red
    Excl. Tax: $8.26 Incl. Tax: $10.33

    Out of stock

    Copper3D MD¹ Flex Sample - 2.85 mm - 50 g - Red Learn More
  10. Copper3D PLActive - 2.85 mm - 750 g - Apple Green
    Excl. Tax: $78.34 Incl. Tax: $97.93

    Copper3D PLActive - 2.85 mm - 750 g - Apple Green Learn More

Grid List

Set Descending Direction

1-10 of 295

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x