Machifit CNC MACH3 Automatic Tool Setting Gauge Z axis Tool Touch Sensor for Engraving Machine CNC Parts

More Views

Machifit CNC MACH3 Automatic Tool Setting Gauge Z axis Tool Touch Sensor for Engraving Machine CNC Parts
Excl. Tax: $62.27 Incl. Tax: $77.84

Availability: Available to order

Delivery time 1 - 2 weeks

Machifit CNC MACH3 Automatic Tool Setting Gauge Z axis Tool Touch Sensor for Engraving Machine CNC Parts
Description

Details

Description:
Machifit CNC MACH3 Automatic Tool Setting Gauge Z axis Tool Touch Sensor for Engraving Machine CNC Parts

Specification:
Output modeNC( normally closed )
Pre tripAlmost 0
Stroke5mm
Repeat positioning accuracy0.001mm(operation speed:50-200mm/min)
Life3000000 times
Contact force1.5N
Outer shellGrinding 4S
ProtectionIP67
Cutter headDiameter 20mm, hard carbide.
Shock rating20mA(MAX) DC24V recommended value(10mA)resistive load
Cable3M 4-cell tensile strength 30N Minimum bending radius R7
Protection Tube1M (Minimum bending radius R25)
Ultra travel alarm 
Exceed the specificationsNC(Normally closed),distance signal about 5mm
Shock ratingDC24V 20mA(MAX) 10mA(Resistive load)
 
Features:
Waterproof dustproof structure, with good durability for CNC machining jobs.
It can greatly improve the efficiency of tool setting in CNC machining.
It will alert when the stroke is exceeded.
Automatic detection of tool breakage: If the tool is damaged or broken, the machine automatically stops running and warns.
Automatic tool wear compensation: Once the head wear is detected, the relevant program can be corrected to ensure the accuracy of the workpiece.

Installation instructions:
1. The props and the tool setting device must be perpendicular to the contact surface, and vertically contact the contact surface, please install as much as possible on the workbench where the iron filing area is small.
2. Be sure to use the voltage within the rated power supply range, please control the DC10-30V, the current is below 20mA, the ambient temperature range is -25° C-70° C. 3. Please control the cutter tool diameter below 20mm and the cutter speed to be below 50-200mm/min. The tool center should fall to the center of the tool face.
 
Package Included:
1 x Tool Setting Gauge

More Details:




















Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x