MKS-GEN L V1.0 Integrated Controller Mainboard + 3.2 Inch MKS-TFT32 For 3D Printer

SKU
1339360
1 In stock
DKK706.25 DKK565.00
-
+
MKS-GEN L V1.0 Integrated Controller Mainboard + 3.2 Inch MKS-TFT32 For 3D Printer is available to buy in increments of 1
Overview
MKS-GEN L V1.0 Integrated Controller Mainboard + 3.2 Inch MKS-TFT32 For 3D Printer
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.
MKS-Gen L

Overview
:
Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS-Gen L, which provides more flexible choices for users.


Features: 
1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.

2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
3. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
4. Use high-quality MOSFET, better cooling and more stable.
5. Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.
6. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.
7. Use CH340 serial port chip, more easily install the drive than 16U2.
8. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.
9. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
10. Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
11. X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
12. Plug the stepper drivers according to the different color terminals which decreases the  probability of reverse and prevents the controller board damage.


MKS-TFT32 Touch Screen


Can be used in MKS Base, MKS Gen, MKS Mini and a series of motherboards.
MKS TFT32 does not support external power supply, can not be used in Ramps1.4.

Features:
1. 3.2 inch full color touch screen, support U disk and SD card.
2. Reserved Wifi interface, adds the Wifi interface can support Wifi (package does not includes the wifi module).
3. Provide continuous software upgrades, upgrade method is simple.
4. Can be used in MKS Base, MKS Gen, MKS Mini and a series of motherboards.
5. The master program no need to modification, plug and play, support Marlin, Repetier, Smoothieware firmware.
6. Support continued printing when power off, power off save.
7. Support no material detection.
8. Boot logo and all buttons and other interface can be designed.
9. Can adds the custom function button.

Other informations can download from here: https://github.com/makerbase-mks/MKS-TFT
MKS TFT32 DataSheet Download here



Package Included:

1x MKS-Gen L V1.0 board
1x MKS-TFT32 touch screen
1x USB cable
1x FC flat cable
System connection diagram:
Installation Dimensional Drawing:
PIN port map:
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account