Multi Material upgrade kit - from MK2 MMU to MK2.5S/MK3S MMU2S

SKU
MMU2S-MK2TOMK3S-ORG
0 In stock
DKK1,000.00 DKK800.00
-
+
Multi Material upgrade kit - from MK2 MMU to MK2.5S/MK3S MMU2S is available to buy in increments of 1
Overview
This is an upgrade for the original MMU 1 to the MMU2S. This enhanced version is much simpler than the original MMU, which makes it easier to use and less sensitive to the quality of filaments. If you have an MK2/S, you have to purchase the MK2/S to MK2.5S upgrade kit separately.
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.

Multi Material Upgrade 2S (MMU2S) is a brand new an improved version of the Multi Material Upgrade 2.0. With an easier calibration process, new filament sensor and a standalone filament buffer, the MMU2S is more reliable than ever before.

WITH THE ORIGINAL PRUSA MMU2S WE ARE INTRODUCING:

NEW FILAMENT SENSOR

With the MMU2S we managed to sense not only that the filament is present, but that it actually reached the Bondtech gears. The filament sensor detects when the idler doors open a bit as the filament pushes Bondtechs apart. MMU2S is much more reliable regarding reloading filaments and the calibration process is also simplified.

FILAMENT BUFFER

The MMU2S comes with the filament buffer, a device designed to prevent filament tangling during loading / unloading process. The buffer allows you to position the five filament spools more freely and also saves valuable space on your desk.

THOROUGHLY TESTED

The testing process of the MMU2S took 2 months to finish, we used 20 printers and we printed 478 test blocks designed to test frequent switching of all five filaments. The total value of filament changes was nearly 600.000. More than 93 % of this prints were successfully completed.

This is not a full MMU2S upgrade! If you don't have the Multi Material yet, please, buy the MK3S Multi Material 2S upgrade

Multi Material Upgrade 2S (MMU2S) is the second generation of our unique multi-material addon, which enables your Original Prusa i3 MK2.5S/MK3S 3D printer to print with up to 5 filaments at the same time.

Compared to MMU1, the new MMU2S went through a major revision, resulting in a simpler and more reliable design. The number of simultaneously supported filaments increased to the total of five, which enables the users to print even more complex and more colorful objects.

MMU2S comes with a redesigned body and a new filament loading mechanism. Instead of the previous Bowden system, the new unit uses a direct-drive feed and a single PTFE tube to lead the selected filament to the extruder. The motorized selector head has a F.I.N.D.A filament sensor and a built-in blade, which prevents filament jamming.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account