NinjaTek Armadillo - 2.85mm - 0.50 kg - Steel

SKU
22929
Out of stock
DKK290.00 DKK232.00
Overview
NinjaTek Armadillo - 2.85mm - 0.50 kg - Steel
Sold By
Footwear Store
0 / 5
Something missing?

Something out of stock or missing?

Please don't hesitate to contact us


Vi er en kreditværdig virksomhed baseret på Bisnodes kreditvurderingssystem. Vurderingen er foretaget ud fra en mængde forskellige beslutningsregler. Oplysningerne bliver opdateret dagligt via Bisnodes database. Kreditvurderingen af virksomheden er således altid aktuel.

Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market.

Made from a specially formulated thermoplastic polyurethane (TPU), its advantages against PLA and ABS lie in its printability and toughness. Armadillo is an excellent material to use for bridging with virtually no warping issues. When you need a rigid product that can withstand wear and tear, Armadillo's resistance to fracturing makes it a perfect replacement.

Suggested Applications: braces, fasteners, gears and protective covers.

  • Shore Hardness= 75D
  •  Excellent bridging capabilities and virtually no warping
  •  Abrasion resistance 84% better than PLA and 60% better than ABS
  • Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  • Consistent diameter and material properties providing reliable, high quality prints
  • No heated bed required. Build platform requires same prep as PLA

Extruder Temperature:
220°C 230°C
Platform Temperature:
Room temperature 45°C
Glue or blue painters tape is suggested if not using a heated bed.
Print Speed:
Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min)
Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min)
Layer 2+ use cooling fan if available.

Armadillo SDS downloadArmadillo TDS downloadArmadillo CRD download
 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account