SELECT Polyether Imide (PEI) Ultem 9085 is an amorphous, high performance thermoplastics with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio.
The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
To make a successful PEI print there are a few things to keep in mind. The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 355-390°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.
PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s.
Material Diameter 1.75mm Tolerance ± 0.05 mm Heated build platform required Yes, 120-160° C Print Temperature 350 - 380° C Recommended Print Speed 15-30 mm/s Weight Filament 500 grams Property Test method Value Density ASTM D 72 1,34 g/cm3 Tensile Modulus ASTM D 638 3440 MPa Tensile Strength ASTM D 638 84 MPa Impact strength ASTM D 256 115 J/m2