SFU1204 600mm Ball Screw with BK10 BF10 End Support and 6.35x8mm CouplerSpecification:
|Length ball screw||600mm|
|Size of coupler||24*30mm|
|Diameter of coupler hole||6.35*8mm|
High transmission efficiency, high positioning accuracy and repeatability of positioning accuracy, long life, high stiffness, drive transmission reversibility reversibility.
Fused with shiny surface matching with high precision. More resistant to wear and tear, greatly extending the life cycle of the ball screw life increased several times.
1. The ball screw nut is inserted into the ball screw after the temporary locking. Position the nut in the middle of the ball screw shaft.
2. The thrust ring and the fixed side of the BK10 support temporarily fixed in one side of the ball screw and tighten.
3. BF10 support seat can be inserted into the another side of ball screw and the single row of bearings into the fixed.
4. Finally, steeper Cooper inserted into ball screw and fixed in the outer side of the BF10 bearing.
1 x SFU1204-L600mm Ball Screw
2 x BK/BF10 Support
1 x 6.35x8mm Coupler
1 x Locknuts
1 x Circlip