BluPrint has a Tg of 110C+ but with a print temp of only 265C. Prints cold orwarm (45C) BuilTak and on clean glass heated to ~92C. BluPrint is a semi-clear material of ~ 84% transmission. Like all taulman3D materials, BluPrint is a 100% bonding layer to layer polymer when printed at defined temperatures. A significant advantage of BluPrint is that when paired with the new E3D Volcano hotend, users and industry can print at speeds of 44mm/s with a 1mm nozzle and .46mm layer. As layer and nozzle size go down, speeds increase as expected to 120mm/s with a .4mm nozzle. BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part
replacements for Autos, Boats and Aircraft.
Print temp 265C - 270C Nozzle any size Print speed ABS speeds = 50% Retraction .5mm/.1mm nozzle or fop a .5mm nozzle = 2.5mm Print bed Glass heated to 95C
Cold = Clean BuildTak or PEI