About LCDA257S Driver:
1. Size: 26*70*116mm (1 x 2.8 x 4.6")
2. Power: 200W
3. Speed response frequency: 0~200KHz
4. Voltage input range: 20V~50V DC(Recommended 36v or more)
5. Rated voltage: 36V DC
6. Maximum output current: 6A
7. Pulse form: Pulse + direction CW/CCW
8. Logic input current: 10~20mA
9. Pulse response frequency: 0~200kHz
10. Insulation resistance: 500M
About LC57H276 Motor:
1. Motor shaft size: diameter: 9mm, Length: about 20mm
2. Opening flange: 69±0.2mm
3. Diameter of mouth: 60mm
4. Step Angle: 1.8
5. Holding torque: 2.0N.m
6. Phase current: 3A
- Closed-loop vector control technology ensures the high torque output, while ensuring that the motor does not lose step.
- With overvoltage, overcurrent, tracking error or over-error, and other protection features.
- Closed-loop driver can significantly improve the high-speed performance of the motor, increasing the effective torque of the motor by more than 30%; Effectively reduce the motor heating and motor vibration, the output current of the driver becomes larger or smaller as the load and speed increase or decrease; It can improve the processing speed and accuracy of the machine and reduce the energy consumption of the machine.
1 x Microstep Driver
1 x Motor
1 x Encoder Cable (2.7 meters)