Zortrax Resin FLEXIBLE is an elastic, epoxy-based resin which is highly impact resistant. Offers smooth surfaces, high level of detail, and sharp edges. Its shore hardness stands at 60 D and its elongation and break amounts to 19%. Low shrinkage and short curing times make Zortrax Resin FLEXIBLE easy to 3D print with as the models come out just right on default settings.
This resin is perfect for precise, flexible parts, and models with softer surfaces. As all Zortrax resins, it has not been classified as carcinogenic under EU legislation and IARC criteria, so it is safe to print with when used in accordance with our safety instructions. Zortrax Resin FLEXIBLE can be cured by UV light with 405 nm wavelength.
- Flexible parts
- Soft surfaces
- Impact-resistant models
- Protective cases
- Safe to use
- Impact resistant
|Dedicated for||Container||Netto Weight||Wavelenght|
|Zortrax Inkspire||bottle||500 ml ± 5%||405 nm|
|Key Properties||Metric||Imperial||Test Method|
|Shore hardness||60 D||60 D||ISO 7619-1|
|Elongation at break||19%||19%||DIN EN ISO 527-1|
|Shrinkage||ca. 2% +/- 1%||ca. 2% +/- 1%||ISO 2577|